Wall Pad Installation - Salvador Escoda MUCSW-16-HG Manual De Instalación Y Funcionamiento

WALL PAD INSTALLATION

1. There is one 3V button battery supplied together with the wired wall pad.
2. Open the wall pad back cover and install the battery.
3. Pay attention to the battery '+' and '-' polar direction.
4. Mount the wall pad back cover to the desired location on the wall.
5. Fix the wall pad body to the back cover.
6. The wall pad is already connected with the communication wire (length 7.5m). Another head of the wire should
be connected with main PCB.
13