Technical Specifications; General Safety Instructions - IKEA FIXA Manual Del Usuario

ENGLISH
FIXA screwdriver/drill, Li-Ion 7.2V

TECHNICAL SPECIFICATIONS:

Voltage/battery type: 7,2 V lithium-ion
battery.
Max. rpm (no-load speeds): 0-400 rpm.
Max. torque: 5 Nm.
Holder for screwdriver bits: 6 mm (1/4").
Chuck: 10 mm (3/8"), keyless, quick-fit/
quick-release chuck.
Charger: Local mains voltage.
Loading time: 3-8 hrs.
Other information: Adjustable torque.
Vibration (according to EN 60745-1,
EN 60745-2-1, EN 60745-2-2)
< a .D= 0.945 m/s², K=1.5 m/s².
h
a =0.564 m/s², K=1.5 m/s.
h
Noise (according to EN 60745-1)
Noise pressure level Lpa = 63.6 dB (A),
Kpa = 3 dB (A)
Noise power level Lwa = 74.6 dB (A),
Kwa = 3 dB (A)
LIST OF FEATURES
The numbering of the product features
shown refers to the illustration of the
screwdriver/drill on the graphic page.
1. Keyless chuck
2. Torque regulator
3. Selector for rotation right/left
4. Infinitely variable speed control/trigger
5. Charger
6. Charger plug
7. Charger socket
8. Charge indicator
9. Holder for screwdriver bit
AREAS OF USE
This cordless drill/driver may be used for
drilling in wood, metal, plastic and ceramic
materials, and for tightening/loosening
screws.

GENERAL SAFETY INSTRUCTIONS

General safety instructions
for power tools
WARNING!
Read all safety warnings and
all instructions. Failure to follow all the
warnings and instructions may result in
electric shock, fire and/or serious injury.
Save all warnings and instructions for
future reference.
The term "power tool" in all of the warnings
listed below refers to your mains operated
(corded) power tool or battery operated
(cordless) power tool.
Work area safety
a. Keep work area clean and well lit.
Cluttered and dark areas invite accidents.
b. Do not operate power tools in
explosive atmospheres, such as in
the presence of flammable liquids,
gasses or dust. Power tools create
sparks which may ignite the dust of
fumes.
c. Keep children and bystanders
away while operating a power tool.
Distractions can cause you to lose
control.
Electrical safety
a. Power tool plugs must match the
outlet. Never modify the plug in any
way. Do not use any adapter plugs
with earthed (grounded) power
tools. Unmodified plugs and matching
outlets will reduce risk of electric shock.
b. Avoid body contact with earthed or
grounded surfaces such as pipes,
4