Configuring Com1 And Unicom - Sartorius YDO01M-232 Instrucciones De Instalación

Configuring COM1 and UniCOM

Operating menu overview for the COM1 and UniCOM interfaces
(see also "Operating Menu Overview" in the chapter entitled "Configuration" in the Midrics operating instructions).
Appl
Fn-Key
Setup WP-1
COM1
UniCOM
12
OFF *
DATPROT SBI *
(data record) XBPI-232
SMA
Printer YDP01IS
YDP02
YDP03
YDP02IS
UNI-PRI (universal printer)
YDP04IS
MEMORY YAM01IS (Alibi memory)
OFF *
DATPROT SBI *
(data record) XBPI-232
XBPI-485
SMA
ETHERNET
Line *
Label
Label, man. form feed
Line *
Label
Line *
Label
Label, man. form feed
Source IP: 192.168.0.1 *
Source name
Listen port: 49155 *
Subnet mask: 255.255.255.0 *
Gateway IP: 0.0.0.0 *
DNS IP: 0.0.0.0 *
Target IP: 0.0.0.0 *
Target port: 49155 *
Protocol TCP *
UDP
Mode SBI (server)-SRV*
SBI-C/S
(client)
xBPI
SMA
Modbus/TCP
6.1. Data output manual/automatic
6.1.1 Manual without stability
6.1.2 * Manual after stability
6.1.4 Automatic without stability
6.1.5 Automatic with stability
6.1.7 Print log for PC
7.2. Output: line format
7.2.1 For raw data: 16 characters
7.2.2 * For other apps: 22 characters
6.1. Data output manual/automatic
6.1.1 Manual without stability
6.1.2 * Manual after stability
6.1.4 Automatic without stability
6.1.5 Automatic with stability
6.1.7 Print log for PC
6.3. Time-dependent autom. output
6.3.1 * 1 display cycle
6.3.2 2 display cycles
6.3.4 10 display cycles
6.3.7 100 display cycles
7.2. Output: line format
7.2.1 For raw data: 16 characters
7.2.2 * For other apps: 22 characters