Installing a CO
Cylinder
2
(For Sparkling Water Refrigerators Only - Optional)
To use the Sparkling Water feature on your refrigerator, you need to install a Sodastream CO
Purchasing CO
Cylinders (60L)
2
• Purchase cylinders (60L) at the nearest Sodastream retailer or on line at www.sodastream.com.
• USE ONLY SODASTREAM carbonators (or CO
not legally responsible for any damage, including, but not limited to, property damage caused by gas
leakage from the use of generic carbonators (or CO
your SAMSUNG refrigerator is designed to work ONLY WITH SODASTREAM carbonators (or CO
cylinders (60L))
• We suggest buying extra cylinders for later use. Store extra cylinders in a cool, open space, well out
of the reach of children.
If you produce the sparkling water when the internal temperature or the temperature of the CO
cylinder is high, such as just after installing the refrigerator, you may hear a "popping" sound.
After installing the refrigerator, generate the sparkling water after running the refrigerator for
approximately 2 hours.
After purchasing the CO
23 ~ 68 °F (-5 ~ 20 °C).
Otherwise, the temperature of the cylinder may be high and it increases the internal gas pressure
so that a noise may be heard.
Water Line Hookup
• Make sure that you have connected the refrigerator to a water line before installing the cylinder.
Installing a Cylinder into the Refrigerator
To install a cylinder in the refrigerator, follow these steps:
1. Open the Cylinder Cover.
• The refrigerator comes from the factory with the Sparkling Water function set to Off. If
the Sparkling Water function is Off, the OFF icon is displayed on the Display Panel.
: Refer to Page 34 ; Turning Off the Sparkling Water Function.
2. Attach the Cylinder to the Regulator, and then rotate it clockwise.
3. Push the Cylinder into the Support.
cylinders (60L)). SAMSUNG and SODASTREAM are
2
cylinders (60L)). The sparkling water system in
2
cylinder, keep it away from direct sunlight and keep it in a cool place
2
cylinder.
2
2
2
setting up _17