Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATING CONDITION
The air conditioner must be operated within the ambient temperature range indicated below:
MODE
COOL
DRY
Vertical
window
12K Model
Minimum:67.5cm(2.22ft).
Maxmum:123cm(4.04ft).
14K Model
Minimum:56.2cm(1.84ft).
Maxmum:98.2cm(3.22ft).
Ho riz ontal
win do w
12K Model
Minimum:67.5cm(2.22ft).
Maxmum:123cm(4.04ft).
14K Model
Minimum:56.2cm(1.84ft).
Maxmum:98.2cm(3.22ft).
11
ROOM TEMPERATURE
O
O
O
O
17
C~
32
C
/ 62 F~92 F
O
O
O
O
13
C~
32
C
/ 54 F~92 F
Fig.7
Fig.8
Fig.9
OPERATING INSTRUCTIONS
INSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS
Location
The air conditioner should be placed on a firm
foundation to minimize noise and vibration. For
safe and secure positioning, place the unit on a
smooth, level floor strong enough to support the unit.
The unit has casters to aid placement, but it should
only be rolled on smooth, flat surfaces. Use caution
when rolling on carpet surfaces. Do not attempt to
roll the unit over objects.
The unit must be placed within reach of a properly
rated grounded socket.
Never place any obstacles around the air inlet or
outlet of the unit.
Allow at least 30cm(0.98ft) of space from the wall
for efficient air-conditioning.
Do not use an extension cord.
Window kit Installation
Your window kit has been designed to fit most
"
"
standard Vertical and horizontal window
applications, However, it may be necessary for you to
improvise/modify some aspects of the installation
procedures for certain types of window. Please refer
to Fig. 8& Fig.9 for minimum and maximum window
openings.
Note:
If the window opening is less than the mentioned
minimum length of the window slider kit, cut that one
with holes in it short to fit for the window opening.
Never cut out the hole in window slider kit.
"
"
Publicidad
Capítulos
Tabla de contenido
