Exhaust Hose Installation - Keystone KSTAP12A Manual Del Usuario

Flat mouth
Fi g.18
Fig.19
Fig.20
Fig.21
INSTALLATION INSTRUCTIONS

Exhaust hose installation:

The exhaust hose and adaptor must be installed or removed
in accordance with the usage mode.
COOL mode
FAN or DEHUMIDIFY mode
Install the window Exhaust adaptor (flat mouth) onto the
1.
exhaust hose as shown in Fig.18. Refer to the previous
pages for window kit installation.
2.
Install the flexible Exhaust hose as depicted in Fig.19 & 20.
NOTE:
The duct can be compressed or extended moderately
according to the installation requirement, but it is
desirable to keep the duct length to a minimum.
IMPORTANT:
DO NOT OVER BEND THE DUCT (SEE Fig.21)
Install
Remove
14