Publicidad
Idiomas disponibles
Idiomas disponibles
CEBORA S.p.A
IMPORTANT: BEFORE STARTING THE
EQUIPMENT, READ THE CONTENTS OF
THIS MANUAL, WHICH MUST BE STORED
IN A PLACE FAMILIAR TO ALL USERS
FOR THE ENTIRE OPERATIVE LIFE-SPAN
OF THE MACHINE. THIS EQUIPMENT
MUST BE USED SOLELY FOR CUTTING
OPERATIONS.
1
SAFETY PRECAUTIONS.
WELDING AND ARC CUTTING CAN BE
HARMFUL
YOURSELF
OTHERS.
The user must therefore be educated against the
hazards, summarized below, deriving from
welding
operations.
information, order the manual code 3.300.758.
NOISE.
This
machine
produce noise exceeding 80dB. The
plasma cutting/welding procedure may
produce noise levels beyond said limit; users
must
therefore
implement
required by law.
ELECTRIC AND MAGNETIC FIELDS.
May be dangerous.
Electric current following through
any conductor causes localized
Electric
and
(EMF).
Welding/cutting current creates EMF fields
around cables and power sources.
The magnetic fields created by high currents
may affect the operation of pacemakers. Wearers
of vital electronic equipment (pacemakers) shall
consult their physician before beginning any arc
welding, cutting, gouging or spot welding
operations.
Exposure to EMF fields in welding/cutting may
have other health effects which are now not
known.
All
operators
should
procedures in order to minimize exposure to
EMF fields from the welding/cutting circuit:
- Route the electrode and work cables together
– Secure them with tape when possible.
- Never coil the electrode/torch lead around
your body.
3.300.232-B
TO
AND
For
more
detailed
does
not
directly
all
precautions
Magnetic
Fields
use
the
following
- Do not place your body between the
electrode/torch lead and work cables. If the
electrode/torch lead cable is on your right
side, the work cable should also be on your
right side.
- Connect the work cable to the workpiece as
close
as
possible
welded/cut.
- Do not work next to welding/cutting power
source.
EXPLOSIONS.
Do not weld in the vicinity of
containers under pressure, or in the
presence of explosive dust, gases or
fumes.
All cylinders and pressure regulators used in
welding operations should be handled with care.
ELECTROMAGNETIC COMPATIBILITY.
This machine is manufactured in compliance
with
the
instructions
harmonized standard IEC 60974-10 (CL.A), and
must be used solely for professional purposes
in an industrial environment. There may be
potential
difficulties
electromagnetic
compatibility
industrial environments.
DISPOSAL
OF
ELECTRICAL
ELECTRONIC EQUIPMENT.
Do not dispose of electrical equipment
together with normal waste!
In observance of European Directive
2002/96/EC on Waste Electrical and
Electronic Equipment and its implementation in
accordance
with
national
equipment that has reached the end of its life
must be collected separately and returned to an
environmentally compatible recycling facility.
As the owner of the equipment, you should get
information on approved collection systems
from our local representative. By applying this
European Directive you will improve the
environment and human health!
IN CASE OF MALFUNCTIONS, REQUEST
ASSISTANCE
FROM
PERSONNEL
9
to
the
area
being
contained
in
the
in
ensuring
in
non-
AND
law,
electrical
QUALIFIED
04/03/2016
GB
Publicidad
