SICK UE 4215 Manual Del Usuario página 104

Chapter
,
*0
*0
* 1 2
*0
*0
*
**+
3
,
. ## /4
. ## /4 . ## /
Take action ...
104
© SICK AG • Industrial Safety Systems • Germany • All rights reserved
When operating the safe busnode UE 4215, the national, local and
statutory rules and regulations must be observed.
General information on accident prevention using opto-electronic
protective devices can be found in the brochure "Safe Machines with
opto-electronic protective devices".
We also refer you to the SICK homepage on the Internet at
http://www.sick.com
-
Actuator-Sensor-interface, a manufacturer-independent system for
the connection of analogue and binary terminal devices (sensors,
actuators, control switches) at the lowest field level.
Extension of the AS-interface system with safety components by
means of the use of a combination of AS-interface safety monitor and
safe AS-interface busnodes.
One or more safety monitors integrated in the AS-interface system
monitor safe AS-interface busnodes and shut down the protected part
of the machine such that the dangerous state of the machine is
brought to an end.
Fail-safe busnodes in the AS-interface Safety at Work system, e.g. the
safe busnode UE 4215.
Electro-sensitive protective equipment, e.g. SICK safety light curtain
C 4000.
Output signal switching device.
* #
Recommendations are designed to give you some assistance in your
decision-making process with respect to a certain function or a tech-
nical measure.
Refer to notes for special features of the device.
The safe busnode UE 4215 has several LED displays. LED symbols
indicate the status of an LED on the safe busnode UE 4215.
Examples:
. ## /
The yellow LED is illuminated constantly.
. ## / The yellow LED is flashing.
. ## /
The yellow LED is off.
Instructions for taking action are shown by an arrow. Read carefully
and follow the instructions for action.
Operating Instructions
8 010 654/O571/19-08-04