Information about conformity
The device fulfils electromagnetic compatibility and electricity safety requirements.
Your device complies with the basic requirements and the relevant guidelines of the
2004/108/EU EMV Guidelines [electromagnetic compatibility] and the 2006/95/EU
Guideline for low voltage devices.
This device fulfils the basis requirements and the relevant regulation of the Ecodesign
Guideline 2009/125/EG (Commission Regulation 1275/2008).
ISO 13406-2 Class II
Active matrix LCDs (TFT) with a resolution of 1024 x 600 pixel, which are in turn
composed of three sub-pixels each (red, green, blue), contain about
1,8 million addressable transistors. Because of this very high number of transistors and
their extremely complex production process occasionally defective or incorrectly
addressed pixels or sub-pixels may occur.
There have been several attempts in the past to define the acceptable number of defective
pixels. But this can be difficult and varies widely between different manufacturers.
We, therefore, adhere to the clear and strict requirements of ISO 13406-2,
class II, for the warranty handling of all TFT display products. These requirements are
summarized below.
Within ISO-standard 13406-2 the general requirements regarding pixel defects are defined.
Pixel defects are classified into three failure types and four failure classes. Each individual
pixel is made up of three sub-pixels in the primary colours (red, green, blue).
Information about conformity
87