Prepare Your Skin For Treatment; Installing And Coniguring Your Homelight Appliance - BaByliss G932E Manual De Instrucciones

It is possible that the power intensity level required will vary with the difference in a person's skin colour according
to the area to be treated. Skin on the arms, generally exposed to the sun more frequently, is for example darker
than the underarms.
But be careful, by increasing the power level for lighter areas on your body, you will have better results but you
also increase the risk of discomfort or even side effects.

6.2. Prepare your skin for treatment

Your skin should be shaved, clean, dry and free of powder and deodorant residue.
Do not epilate (whether using an electric epilator or wax) before using the Homelight epilator. The epilation
(removal of hair at the root) will make the pulsed light treatment ineffective.

6.3. Installing and coniguring your Homelight appliance

1. Remove the appliance and other Homelight epilator parts from the box.
2. Plug the adapter cable into the appliance.
3. Plug the other end of the adapter into the mains. The 'ON/OFF/READY' Indicator Light will come on in
orange.
4. Press the ' ' button to switch the appliance on. The 'ON/OFF/READY' light will turn green. You will hear
a slight noise of a fan.
Your Homelight epilator is ready to use.
Please wear the safety glasses provided when using the Homelight epilator.
5. About 1.6 second (at level 1) after having pressed the
come on. The appliance is ready to release the irst pulse. The appliance is set to the lowest power setting
by default. The level 1 power indicator light is lit.
6. Select the power level that corresponds to your skin type (see table representing various phototypes).
Using the button, select the desired intensity level. The indicator lights that correspond to the selected
power level will come on in green. For example, for power level 3, the indicator lights for the irst 3 levels
will come on. To move up from level 4 to level 1, for instance, press the
the appliance will move up from level 4 to level 5, then backwards from level 5 to level 4, from level 4 to
level 3 and so on down to level 1.
7. Press the application surface irmly against your skin so that there is full contact. When the application
surface is in full contact with the skin, the 'ON/OFF/READY' indicator light will start to lash.
48
button, the 'ON/OFF/READY' indicator light will
button as often as necessary :