Replacing The Collection Bag; Safekeeping; Waste Disposal And Environmental Protection - Deltafox DG-ELB 3014 Traducción Del Manual De Instrucciones Original

Cleaning the blower/suction tube and
impeller wheel:
1. Remove the tube-fastening screws
( 3) and pull off both parts of the
blower/suction tube (
2. Clean the inside of the two-piece
blower/suction tube.
3. Carefully remove dirt residues on the
impeller wheel with a bottle brush or
similar and remove bulky objects with
a blunt not sharp tool.
4. Check whether the impeller wheel
turns easily and is in fault-free condi-
tion. Have a defective impeller wheel
replaced by an authorised customer
service centre.
5. Refit the blower/suction tube and
screw it in place.

Replacing the collection bag

Replace a defective collection bag. Em-
ploy only original collection bags (see
"Spare Parts"), otherwise the guarantee
claim is invalid.

Safekeeping

• Keep the foliage vacuum in a dry,
frost-free location, which is inacces-
sible to children.
• Do not store the device in direct sun-
light; store it in dark or in reduced light
conditions.
• Do not cover the device with nylon
bags, since moisture can form.
• Clean the device thoroughly at the
season end and for storage during
wintering. Clean the collection bag by
removing it, emptying it and washing
with warm water and neutral soap. Re-
attach the dried bag again.
• Ensure that all nuts, bolts and screws
Waste disposal and envi-
2a+2b).
ronmental protection
Be environmentally friendly. Return the
tool, accessories and packaging to a
recycling centre when you have finished
with them.
Hand over the device at an utilization
location. The plastic and metal parts
employed can be separated out into pure
materials and recycling can be imple-
mented. Ask your Service Center about
this.
Defective units returned to us will be dis-
posed of for free.
are tightened so the equipment is in
safe, functional condition.
Machines do not belong with do-
mestic waste.
GB
31