Intended Machine Use; Non-Intended Machine Use; A - Zone With Risk Of Explosion; Demolishing The Machine - Wirbel SW1 450M ECO Uso Y Mantenimiento

EN
1.3 INTENDED MACHINE
USE
The machine has been designed and manu-
factured for washing and drying indoor floor
surfaces.
DANGER:
Any other use releases the manufacturer
from responsibility for damage or injury
to persons and/or things and invalidates
any warranty condition.
1.4 NON-INTENDED
MACHINE USE
WARNING:
The machine is not intended for outdoor
use.
DANGER:
- do not wash floors with water hotter than
50°C;
- do not use diesel/petrol or corrosive de-
tergents to wash floors;
- do not wash or suck up corrosive, flam-
mable and/or explosive liquids, even if
diluted.

1.4.a - Zone with risk of explosion

It is strictly forbidden to use the machine in
environments where there is a risk of explo-
sion with the presence of flammable and ex-
plosive gases, vapours, liquids and powders.
1.5 DEMOLISHING THE MA-
CHINE
In order to protect the environment, proceed
in compliance with local standards in force.
When the appliance can no longer be used
or repaired, proceed with the separate dis-
posal of its components.
Electrical equipment cannot be
disposed of as urban waste and
it is necessary to dispose of it
separately as introduced by the
special
the disposal of waste originat-
ing from electrical equipment
(Italian Legislative Decree no.
151 of 25/7/05 - 2002/96/EC -
2003/108/EC).
The electrical equipment is marked with a
symbol showing a wheeled bin with a cross
on it. The symbol indicates that the equip-
ment was put on the market after 13 August
2005 and that it must be disposed of sepa-
rately.
In consideration of the substances and ma-
terials contained, inadequate or abusive dis-
posal of the equipment or its improper use
may cause damage or injury to persons and
the environment.
Disposal of electrical waste which does not
respect the standards in force leads to the
application of administrative sanctions and
penalties.
1.6 REFERENCE
STANDARDS
This machine has been built in compliance
with the machine directive in force and in ac-
cordance with the standards contained in the
EC Declaration of Conformity supplied with
the machine.
EN-6
regulation regarding