C - Cleaning The Squeegee; D - Cleaning The Clean Water Filter (Optional) - Wirbel SW1 450M ECO Uso Y Mantenimiento

EN

10.1.c - Cleaning the squeegee

(Fig. 18)
In order to clean the squeegee correctly (1),
it is necessary to remove it as follows:
- Disconnect the hose (2) from the squee-
gee (1).
- Loosen the knobs (3) and remove the
squeegee (1).
- Wash the squeegee and in particular the
rubber blades (4) and the inside of the as-
piration connector (5).
N.B.:
If, during washing, it is clear that the rubber
blades (4) are damaged or worn, it is neces-
sary to replace them or turn them over.
- Replace all the components in reverse
order.
OPERATIONS TO
PERFORM
MONTHLY
10.1.d - Cleaning the clean water filter
(optional) (Fig. 19)
- Unscrew the transparent filter cover (1)
and remove the filter (2).
- Clean the filter (2) using running water.
- Replace all the components in reverse
order.
3
1
4
EN-22
3
2
5
Fig. 18
1
2
Fig. 19