Operating The Swash - brondell Swash CL825-EW El Manual Del Propietario

OPERATING THE SWASH

QUICK REFERENCE GUIDE – BIDET SEAT CONTROLS
Basic functions such as Rear Cleansing and Nozzle Cleaning can be used without the
remote by utilizing the auxiliary buttons shown below.
1
2
3
4
1
SEAT DISPLAY
1. Remote IR Receiver (3)
Receives signal from remote control.
2. Power Indicator
This indicator is illuminated when the bidet is powered on.
This indicator is turned off when Eco mode is activated.
3. Eco Mode Indicator
This indicator is illuminated when Eco mode is activated.
4. Seat Temperature Indicator
This indicator is illuminated when the seat temperature is set to Low, Medium, or High.
The indicator is turned off when the seat temperature is off.
AUXILIARY CONTROL PANEL
5. Power Button
Turns the seat On/Off. Press and hold the button for 2 seconds to turn off.
If the Power button is pressed while any cleansing function is operating, the cleansing
function will stop and the seat will change to standby mode.
6. Rear Cleansing Button
Selects the rear cleansing function.
7. Nozzle Cleaning Button
When pressed, the nozzles fully extend, allowing for easy cleaning. Press again for the
second nozzle to extend and once more to retract.
7
6
5
1
15