Specifications - Textron Greenlee QUICK DRAW 7804SB Manual De Instrucciones

Specifications

Application Information
See Capacity and Draw Stud Selection Guide
Dimensions
Length:
Without Draw Stud: ............................................................. 321 mm (12.625")
With 3/4" Draw Stud: ........................................................... 397 mm (15.625")
Width (with handle extended): ..................................................... 260 mm (10.25")
Mass/Weight: ................................................................................ 2.49 kg (5.5 lbs)
Mechanical Data
Stroke (Maximum): ............................. 22 mm (.850") Minimum Draw Stud Travel
Handle Force (Maximum): ............................................................... 356 N (80 lbs)
Draw Stud Force (Maximum): .............................................. 71,168 N (16,000 lbs)
Punch Diameter (Maximum): ........ See Capacity and Draw Stud Selection Guide
Material Thickness (Maximum): .... See Capacity and Draw Stud Selection Guide
Hydraulic Data
Circuit Type: ................................................................................................ Closed
Operating Pressure (Maximum) .......................................... 44,480 N (10,000 lbs)
Volume:
Stroke: ................................................ .034 cm
Useable: ........................................................................ 33.9 mm
Reservior: ...................................................................... 38.0 mm
Total: .............................................................................. 57.4 mm
Seals: ........................................... Nitrile, Fluorocarbon and Teflon Backup Rings
Fluid Compatibility: Compatible with hydraulic oils, water, oil emulsions,
Recommended Fluid: ......................................................... Greenlee Hydraulic Oil
Miscellaneous
Operating Temperature: .............................................. -12° to 43°C (10° to 110°F)
Operating Position: ......................................................................... No restrictions
Greenlee Textron / Subsidiary of Textron Inc.
7804SB/7806SB Hydraulic Punch Driver
synthetic oils rated for use with nitrile (Buna N) and
fluorocarbon (Viton) seal material.
3
per mm (.053 inch
5 4455 Boeing Dr., Rockford, IL 61109-2988 815/397-7070
3
per inch)
3 (2.07 inch 3 )
3 3
(2.32 inch )
3 (3.50 inch 3 )