Opening The Main Dvd Menu; Opening The Dvd Title Menu; Displaying Information About A Disc; Selecting A Program For Playback - Dynex DX-R20TR Guia Del Usuario

50
4 Press the SETUP button one or more times to close the DVD OSD. When multiple
viewing angles are available on a DVD, an angle mark appears on the screen.
5 When the angle mark appears on the screen during DVD playback, press the ANGLE
button one or more times to view different viewing angles.

Opening the main DVD menu

To open the main DVD menu:
• Press the D.MENU button.

Opening the DVD title menu

With some DVDs, you can use the remote control to open a title menu.
To open the DVD title menu:
1 Press the TITLE button. If the DVD has a title menu, it opens.
2 Use the number buttons to select the item you want.

Displaying information about a disc

To display information about a disc:
• Press the square DISPLAY button one or more times. Each time you press this button,
the display changes from:
• Title Elapsed–Shows the elapsed playing time for the title.
• Title Remain–Shows the remaining playing time for the title.
• Chapter Elapsed–Shows the elapsed playing time for the chapter.
• Chapter Remain–Shows the remaining playing time for the chapter.
• Display off–Turns the information display off.

Selecting a program for playback

To select a program for playback:
1 While the disc is playing, press the PROGRAM button.
2 Use the number buttons to enter the number of the program you want to play, then
press the
Your TV combo starts playing the program, and Program appears in the top left of the
screen.
3 To cancel Program mode, press the PROGRAM button, select STOP, then press the
PLAY/ENTER button.
, , , or button to select START, then press the PLAY/ENTER button.
Using the DVD player