Alesis TransActive 50 Manual De Inicio Rápido Para El Usuario página 3

Quick Setup for the TransActive 50
Make sure that all of the items listed on the front cover are included in the
TransActive 50's box.
Read the Important Safety Instructions included in the box.
Study the Hookup Diagrams below.
Make sure all equipment is turned off and all gain knobs are set to zero.
Connect your keyboard, microphone, or other equipment to the TransActive 50.
Once everything is plugged in, turn everything on. Make sure to turn the
TransActive on last (after all other devices have been turned on).
Experiment with the TransActive's knobs and effect settings.
When finished, turn off the TransActive first (before turning off any other
equipment). This helps prevent damage to the speaker.
Go to http://www.alesis.com to register your TransActive 50.
1