Alesis TransActive 50 Manual De Inicio Rápido Para El Usuario página 6

Aux In
7.
DJ mixer, or any other line-level source to the
TransActive 50. This is useful if you want to play along
to a DAT, CD player, or some other source.
Aux Out –
8.
signal to another device (such as a recorder or mixing
board).
Stereo Bus Link –
9.
this output to connect the two speakers and to use them in stereo. For more
information about this, see the section entitled "Using a Pair of TransActives in
Stereo."
Link Channel Switch (Left, Right, Off) –
10.
TransActives in a stereo configuration (using the Stereo Bus Link connection), use
this switch to determine which side the speaker should be on. See the section
entitled "Using a Pair of TransActives in Stereo" for more about this switch.
4
– This input allows you to hook up a CD player,
These ¼" outputs let you send your mixed
If you own a pair of TransActive 50 monitors, you can use
About the Aux Input
This input goes straight to the
main output and does not
have its own level control on
the front. If you'd like raise
or lower the volume of this
input, use the volume control
on your source.
If you are using a pair of