Alesis TransActive 50 Manual De Inicio Rápido Para El Usuario página 8

Your TransActive50 is ready to go right out of the box. If
you plug in a microphone (or keyboard), power up the unit,
and turn up the channel and main volume knobs, you should
be able to hear yourself (or your keyboard). Make sure the
Link Channel Switch (directly underneath the "Stereo Bus
Link" jack) is set to "Off." If this switch is set incorrectly,
you may be hearing only one channel of your line level
inputs. See the diagram below:
6
Using your TransActive in Mono
If you've plugged in your
keyboard (or other stereo
source) but you're only
hearing one side of the stereo
signal, your Link Channel
Switch is probably set
incorrectly.
Set this switch to "Off" to
hear both channels of your
stereo source.