Safety Alert Symbols
Make sure you read this section very carefully! Learn to recognize
u
these
Safety Alert Symbols.
provide a high level of protection to an operator. Follow the guidelines
below while installing, operating and maintaining your machine.
CAUTION: Indicates a hazardous situation which, if not avoided, could result in
!
CAUTION
minor or moderate injury. It may also be used without the safety alert symbol as
an alternative to "Notice".
WARNING: Indicates a hazardous situation which, if not avoided, could result in
!
WARNING
death or serious injury.
DANGER: Indicates a hazardous situation which, if not avoided, will result in
!
DANGER
death or serious injury. This signal word is to be limited to the most extreme
situations.
Trip Hazard
Two Person LIft
Safe Operating Guidelines
Always keep this instruction manual with the machine for reference to
u
safe operating guidelines and correct operation of the machine.
The OD4012 needs to be plugged into a wall outlet that provides a 15-
u
amp, 120 volt service (16-amp, 220 volt for European installations)
and is protected by a fuse or circuit breaker at the main electrical
panel.
Always replace any fuse with the same type and
u
amperage fuse as indicated on the machine.
If machine cycles on its own, turn off power switch, unplug machine
u
from the wall outlet and call your dealer immediately for service.
The OD4012 has been designed to
Electric Shock
Crushing Hazard
4
Cutting Hazard
Hint or Suggestion
!
WARNING
Hazardous voltage
inside.
Disconnect power
before servicing.