Rhin-O-Tuff OD4012 Manual De Instrucciones página 7

Turn power switch off before maintaining or
u
changing die assembly.
Use of appropriate hand protection should be
u
utilized to avoid injury from handling of materials.
Follow all recommended workplace procedures for repetitive activities.
u
Placing your machine in the proper location:
Before lifting machine, turn power off and
u
remove the power cord from the wall outlet.
The machine is very heavy! Never attempt to lift
the machine by yourself. Two people will be
needed to lift the machine.
Place the machine on a hard level surface, place the foot pedal on the
u
floor in front of the machine. Ensure the placement of machine allows
for ergonomic work flow (separate locations for un-punched books and
punched books).
Connect the foot-pedal into the foot-pedal
u
receptacle on the back of the machine, do not
attempt to connect foot-pedal into anything other
than the foot-pedal receptacle.
Optional paper activated switches are available
u
for these punches. These switches replace the foot-
pedal and plug into the foot-pedal receptacle on the
back of the machine.
5
!
WARNING
Crush hazard.
Keep hands away
from moving parts.
Lockout and disconnect
power before servicing.
! CAUTION
Cutting Hazard
Injury to fingers
and hands.
Use hand protection
! CAUTION
Lifting Hazard
Single person
lift could result
in injury.
Two person lift required.
!
CAUTION
Tripping Hazard
Bodily injury could
occur from fall.
Route cables away
from walkways