Frequently Asked Questions - Corsair GRAPHITE 380T Serie Guia De Instalacion

GRAPHITE SERIES

Frequently Asked Questions

1. How do I remove the I/O Panel ?
A. To remove the front fascia, push in the tabs from inside the fascia, then push
towards the front of the case.
B. unscrewing the 2 screws at each side of panel.
2. Does the polarity matter with the I/O panel's power and reset header?
No, only the LED headers.
3. Who should I contact if I received my case damaged or one of the fans is no
longer working?
Please go to corsair.force.com and request an RMA
so that we can replace the damaged part(s).
9
380T
®
4. Where can I mount a fan?
Fan Mount Locations
Front 2 x 120mm, 1 x 140mm, 1 x 200mm
Top
Rear 1 x 120mm
Bottom
Side 2 x 120mm
Mid
5. How do I remove the front panel?
To remove the front panel, push the top corners of the plastic cover.
6. How do I remove the bottom PSU filter(s)?
To remove the bottom dust filter, first locate the pull out tab underneath the PSU,
then pull the bottom dust filter out.
To learn more about this case visit the product page at corsair.com
x
x
x
10