Installation Instructions - TESY WEF200SRELW Manual De Instalación, Operación Y Mantenimiento

•
The most common cause of overheating is fluff and
dust deposits in the appliance. Clean the ventilation
openings regularly with a vacuum cleaner. Before
that disconnect the power plug from the mains.
•
Never touch the appliance with damp or wet hands
– this may be dangerous to for your life!
•
The power socket must be easily accessible all the
time in case the power plug has to be disconnected
as fast as possible! Never pull the power cord or the
appliance itself in order to disconnect it from the
mains.
•
ATTENTION! Outgoing air gets hot during
operation (up to more than 100°C).
•
If the power cord of this appliance gets damaged,
stop its operation and call its supplier/retailer for
additional instructions.
•
If the appliance is damaged or does not work
properly, stop it and do not repair it yourself. For
any kind of repairs call for assistance an after-sale
service centre. This is the place where you will have
your broken part replaced with an original one.
Non-adherence to this instruction will compromise
the appliance safety.
•
If you decide to stop using such kind of appliance,
it is advisable to render it unusable by cutting its
power cord after disconnecting it from the mains. It
is advisable all possible risks related to the appliance
to be secured, especially in relation to children that
may play with out-of-use appliances.
•
Never keep the appliance unnecessarily switched
on. Disconnect it from the power socket when you
do not intend to use it for a long period of time.
•
The appliance should not be placed right under a
socket.
•
Warning: Do not use this appliance with a
programming device, counter or any other device
which can automatically switch it on because if the
appliance is covered or improperly positioned this
may cause fire.
•
Position the power cord in such a way that it does
not obstruct the free movement of people and
cannot be stepped on! Use only approved extension
cords which are suitable for this appliance, i.e. have
got a conformity sign!
•
Do not bend the power cord and do not stretch it
over sharp edges, do not position it over hot plates
or open flames!
•
Never use the electric fireplace in close proximity to
a bathroom, a shower cabin or a swimming pool!
•
Do not lift the fireplace by the front glass.
English
PACKING
•
After unpacking the appliance, check if all its
elements are included in the packing and that it has
not been damaged during transportation! In case
damage or incomplete delivery is found, contact
your authorized retailer!
•
Do not throw away the original packing! It could
be used for storage and transportation purposes in
order to avoid damages during transportation!
•
Disposal of packing materials should be done in
the appropriate way! Children should be prevented
from playing with polyethylene bags!

INSTALLATION INSTRUCTIONS

The electric fireplace is intended only for
wall-mounted operation!
•
The fixed elements in the packing are of small size
and they should be kept away from small children.
We recommend all elements to be put in a small
box and to be stored away from children.
•
Small children should be prevented from playing
with polyethylene bags – there is risk from
suffocation. We recommend disposing of them right
after emptying them.
•
Do not connect the electric fireplace until it has
been well-mounted to the wall and you have read
all important instructions above.
•
The minimum distances in front of, above and under
the fireplace shall be observed as indicated above
and shown below.
•
During mounting you should be careful about
not damaging the cables in the walls. Please pay
attention when drilling holes in the walls. Danger
from electric shock!
•
The appliance is designed to be permanently wall-
mounted at height of minimum 300 mm from the floor.
The bearing clamp shall be in horizontal position. The
power cord is in the bottom right corner of the fireplace.
Usage and Storage Instructions
EN
3