TESY WEF200SRELW Manual De Instalación, Operación Y Mantenimiento página 5

Temperature and serial number display
Normally it displays the room temperature; while setting
the temperature, the temperature being set is displayed;
When setting the timer, serial number is displayed.
Time display
Normally it displays the current time; while setting the
timer, the time being set is displayed.
Timed starting and timed shutdown
It is displayed while setting the timer, and it is used in
combination with serial number setting.
E.g.,
means the startup time for setting 5 is 23:40;
means the shutdown time for setting 5 is 6:10.
Flame brightness
It displays the current brightness of the flame, which
ranges from one to five positions. This icon is not
displayed for color flame.
REMOTE CONTROLLER AND CONTROL SWITCH
BOOT STEPS
Connect the power
1.
Turn on the power switch
2.
Press the control switch or „ON/OFF" key of the
3.
remote controller to start up
HEATING DEVICE
Press the 1000W button to can control the low-level
1.
heating of the fireplace and stop heating
Press the 2000W button to can control the high-
2.
level heating of the fireplace and stop heating.
AUTOMATIC HEATING
Press IC button on the remote controller to start or exit
the automatic heating.
English
Indicator
Button
When turned on, the fireplace can automatically change
the heating mode depending on the set temperature
and the room temperature.
During a timed starting process, it is possible to start
heating ahead of schedule.
MONOCHROME FLAME FIREPLACE WITH
ADJUSTABLE FLAME BRIGHTNESS
Method one: Hold down the control switch О/I (
) button, the flame brightness changes, release the
button when the desired brightness is reached.
Method two: press „DIMMER" button on the remote
controller, the flame brightness may change step by
step with each press of the button.
SETTING THE DATE AND TIME
Settings are done on the remote controller;
1.
Press „DATE TIME" button, then press the
2.
key to select the date;
Press „DATE TIME" button again, then press the „+"
3.
or „-" to set the hour
Press „DATE TIME" button again, then press the „+"
4.
or „-" to set the minute
Press „OK" button to complete
5.
TEMPERATURE SETTING
The default set temperature is 20°C, press „+" or „-" on
the remote controller to set the temperature, which
ranges from 15 to 30°C, and this is the normally set
temperature (the timer is off )
TIMER SETTING
Description of setting
1.
There are up to 10 items for timer setting
Each item of setting has its date, power-on time and
shutdown time
The max. duration of each item of setting is 23 hours 50
minutes
The set date for each item can be any day or days of a week
The date in each item of setting represents the date of
power-on time
If the shutdown time being set falls on the second
day, it is unnecessary to set the date – you just set the
shutdown time.
Steps to view the timer setting
2.
Press the „TIMER SET" button
Press the „+" or „-" to check the power-on time set by the
timer item by item
For checking the shutdown time, press the „ " button.
Press the „+" or „-" to continue viewing
For deleting the current item of setting, press „C" to
delete.
or
Usage and Storage Instructions
EN
,
5