How It Works - Steren DIS-100 Manual De Instrucciones

7. LAN COMMUNICATION

7.1 How it works

The display is first connected to the Serial Communication Port of a computer in the
LAN environment which we refer to as the Receiving Computer (RC). The computer that
will actually be transmitting messages to the display is referred to as the Transmitting
Computer (TC). Install the TMC software on the RSC.
The next step is to set-up a generic/text only printer driver on the RC and share it with
the TC. Once the set-up is done and a message created, a simple click on the button for
"Send via Network" will bring up the "PRINT" dialog window.
You then select the Generic/Text
Only printer created and click on
"OK" and your message is on its
way.
7.2 RC printer driver set-up
1 Start by clicking on "Start", "Control Panel", and "devices and printers". The devices
and Printers window will open.
2. Click "Add a printer". Display the wizard for adding a printer.
3. Select "Add local printer".
27