Troubleshooting Guide - Oregon Scientific BPW120 Manual De Usuario

NOTE
· The most recent record (1) is shown first. Each new
measurement is assigned to the first (1) record. All other
records are pushed back one digit (e.g., 2 becomes 3, and
so on), and the last record (30) is dropped from the list.
· Press MEM / UP again to see additional records.
· The date and time of measurement are shown with each
record.
· Memory records will be kept even when the batteries are
replaced.

TROUBLESHOOTING GUIDE

This section includes a list of error messages and frequently
asked questions for problems you may encounter with your
blood pressure monitor. If the product is not operating as you
think it should, check here before arranging for servicing.
PROBLEM SYMPTOM
No Display is dim
power or will not
light up.
Low shows on
batteries
the display.
CHECK THIS REMEDY
Batteries are Replace with new
exhausted. batteries ( P6).
Batteries are Insert the
inserted batteries correctly
incorrectly. ( P6).
Batteries are Replace with new
low. batteries ( P6).
PROBLEM SYMPTOM
Error
shows on
message
the display.
1 shows
on the display.
4 shows
on the display.
5 shows
on the display.
10
CHECK THIS REMEDY
A Relax for a
measurement moment and then
error measure again.
occurred.
The wrist cuff Refasten the cuff
is not secure. and then measure
again ( P7).
The monitor Movement can
detected affect the
motion while measurement.
measuring Relax for a
moment and then
measure again.
Pressure is Relax for a
over moment and then
280mmHg measure again.
(37.3 kPa)