Removing The Front Fascia; Removing The Top Panel; Installing Hdds And Ssds; Installing Additional Ssds - Corsair Carbide Serie Guia De Instalacion

CARBIDE SERIES
®

5. Removing the Front Fascia

To remove the front fascia,
gently pull the front away from
the case while pressing on the
tabs securing it.

6. Removing the Top Panel

Remove the screws from the
SPEC-ALPHA STEP5
top rear of the case, and slide
top panel backwards gently
until you can lift it off.
11
SPEC-ALPHA

7. Installing HDDs and SSDs

Simply pull back retention arm
and slide in the 2.5" SSD or
3.5" HDD until the retention
arm snaps back into place.
SPEC-ALPHA Step 8

8. Installing Additional SSDs

Align the 2.5" drive to the
mid-panel of the case, and
secure with the included
screws from the
accessory box.
12