Push-Button Functions; Mode Button; Manual Range & Stroke 4/2,Hz,%,Ms,Cyl Button; Data Hold - Bosch MMD 540H Manual De Instrucciones

10 | MMD 540H Hybrid Multimeter | Push-button Functions
Push–button Functions

Mode Button

Press the mode pushbutton to select the
following functions; DC/AC Voltage, DC/AC
Current Resistance, Diode, Continuity &
Capacitance
Manual Range & Stroke 4/2(DIS), z,
%, ms +, CYL Button
Press to this button to select: STROKE
4, 2DIS, Hz ,%, ms+ , CYL range & V/A/
Resistance manual Range
Manual Ranging
The meter turns on in the autoranging
mode.
Press the Range button to go to manual ranging.
The display icon "
range button will step to the next range as indicated by
the units and decimal point location. Press and hold the
Range button for two seconds to return to autoranging.

Data Hold

The Data Hold function allows the meter
to "freeze" a measurement for later
reference.
1. Press the DATA HOLD button to
"freeze" the reading on the indicator.
The indication of "HOLD" will appear in
the display.
2. Press the DATA HOLD button again to return to
normal operation.
Robert Bosch LLC
" will appear. Each press of the
MMD 540H Instruction Manual | Version 1 | February 2008