Emergency drain
In case of a power failure, drain the water inside the drum before taking out the laundry.
WW22N6850QX_DC68-03645B_EN.indd 47
A
1. Power off the washer, and then unplug
it from the electrical outlet.
2. Gently press the top area of the filte
cover to open.
3. Put an empty, spacious container
around the cover, and stretch the
emergency drain tube to the container
while holding the tube cap (A).
4. Open the tube cap and let water in the
Emergency drain tube (B) flow into the
container.
5. When done, close the tube cap, and
reassemble the tube. Then, close the
filter cover.
NOTE
Use a spacious container because the
water in the drum may be more than
expected.
English 47
2018/3/1 9:37:26