STEP 6 Remove the film inside the door
B
STEP 7 Power on
Plug the power cord into an AC 120 V / 60 Hz approved electrical outlet protected by a
fuse or circuit breaker. Then, press POWER to turn on the washer.
WF5500M_DC68-03876A-00_EN.indd 27
Wall standpipe drain system
The drain hose must be placed into a wall
standpipe drain system. To keep the end of
A
the drain hose bent, use the supplied hose
guide (A). Secure the guide to the wall
using a hook to ensure stable drainage.
Remove the small circle film (B) above the
door latch before use.
English 27
11/2/2017 3:59:20 PM