Maintenance; Self Clean - Samsung WF45M5500A Serie Manual De Usuario

Maintenance

Keep the washer clean to prevent its performance from deteriorating and to preserve it
throughout its life cycle.
WARNING
Control board, heat sink, motor, inlet valve and pump are intentionally not grounded and
may present a risk of electric shock only during servicing.

Self Clean+

Perform this cycle regularly to clean the drum and to remove bacteria from it.
1. Make sure the drum is empty.
2. Press POWER to turn on the washer.
3. Press Self Clean+.
4. Press START/PAUSE.
NOTE
- The water temperature for Self Clean+ is set to Extra Hot, which cannot be changed.
(only for WF45M5500A* model)
- The water temperature for Self Clean+ is set to Hot, which cannot be changed. (only
for WF45M5100A*/WF45N5300A* model)
CAUTION
Do not use any cleaning agents. Do not add detergent or bleach. Chemical residue in the
drum degrades the cleaning performance.
Self Clean+ reminder (
• The Self Clean+ reminder appears on the main screen once every 40 washes. It is
advisable to perform the Self Clean+ regularly.
• If you do not run the cycle within 1 hour when the Self Clean+ reminder appears, the
reminder turns off automatically.
• When you first see this reminder, you can ignore the reminder for 6 consecutive
washes. From the 7
on the second 40
WF5500M_DC68-03876A-00_EN.indd 43
)
wash, the reminder no longer appears. However, it appears again
th
wash.
th
English 43
11/2/2017 3:59:24 PM