Volumetric Detectors - Hiltron security PROTEC5X Manual Para El Usuario

PROTEC5X - User's manual
2.3.2 Volumetric detectors / Antitearing protection tamper
2B4
ANTITEARING PROTECTION TAMPER
6mm hole for antitearing tamper
Perform a 6mm hole and insert the plug supplied. .
!
Tighten the screw until the boss useful. It will
!
activate the tamper on the back of the central series
PROTEC
Installation tamper on PROTEC base
Insert into the hole in the plastic support provided.
!
Plug the cable to the card.
!
Secure with 2 screws the tamper base of
!
the plant, making sure that the tamper spring going
to fit into the plastic base.
Connecting to tamper central
The tamper should be connected to the terminal on
!
the 24H of the plant, using the supplied cable.
32
1 2 3 4
PG12
5 6 7 8 9 10 11
In series to
the 24h line
ANTITEARING
TAMPER
2 screw
for fixing support
on base
security
12 13 14 15
screw +
Plastic
anchor