Alarm Memory; Maintenance; Cleaning; Fuses - Hiltron security PROTEC5X Manual Para El Usuario

security
If the NC line is not restored, the zone autoexcludes.
!
This line is made by a series of antiopening and antitearing tampers inside of the system
devices.
4.5

Alarm memory

With the system disabled,pressing the "MEMORY ALARM" key, the zones control LEDs
show thezones zones and the zones have caused the alarm.
LED on
LED blinking
5

Maintenance

5.1 Battery
It is advisable to check the battery connected to the power supplier/battery charger and
the battery inside of the self-powered sirens.
5.2

Cleaning

For the central unit cleaning, use only a soft and humid cloth.
Do not use absolutely diluents and abrasive sponges.
5.3

Fuses

F1 Sirens output
F2 Services output
zone autoinhibited
zone has caused the last alarm
F type 3A
F type 1A
Operating
47