Health O Meter Professional 596KL Manual Del Usuario página 18

CALIBRATION (CONT.)
11. When the calibration weight is set press
display.
12. Place the entered calibration weight onto the center of the scale seat.
The display will show a Span count value. After the digits stabilize
press .
ZERO
13. After a moment the display will change to weighing mode and the
calibration weight value will appear on the display. Remove the weights
from the scale seat then press and hold
14. The calibration procedure is complete.
P/N UM596KL_596KL-C REV20190923_web
Operation
. "0" will appear on the
ZERO
to power off the scale.
ZERO
18
Display
"0"
"XXXXX"
"XXX"