Panasonic CQ-RX400U Guía De Mejora Del Sistema página 18

Troubleshooting (continued)
Display
Cannot receive Sirius Satellite Radio.

Verify the wiring.
Sirius antenna unconnected.

Connect the Sirius antenna.
"ANTENNA ERROR"
User's registration has not been carried out.

Complete user's registration.
A channel that is not included in the agreement was selected.
"CALL 888-539-SIRIUS"

Select a channel that is included in the agreement. Refer to the operating
instructions for Sirius receiver with regard to the agreement.
The subscription information was updated.

Wait for 3 minutes in the Sirius mode.
"SUBSCRIPTION UPDATED"
Your location is out of receivable areas (e.g. in a tunnel), or the unit is decoding
a selected broadcast. The display appears also while the connections are being
checked after the power has been turned on.
"ACQUIRING SIGNAL"

Wait until getting out of the unreceivable area or completing the decoding.
Problem
The Bluetooth
This unit does not display

the pairing screen when Bring the Bluetooth
trying to pair a device. pair again.
The voice of the other party heard from the car speakers is being picked up by the
microphone of the Bluetooth

Close the windows.
The other party in the call

complains of echoing or Move the Bluetooth

noise. Lower the volume.

Set Speaker Selection Setting to "SP LEFT" or "SP RIGHT".

Set the Echo Cancel Setting to "EC HIGH".
Telephone audio is of poor
Cellular phone reception is poor.
quality.

Telephone audio is Check cellular phone reception.
inaudible.
The Bluetooth
Bluetooth ® audio does not Remote Control Profi le).

work. Check the instruction manual of the Bluetooth
support conditions.
34
CQ-RX400U/CQ-RX200U

Possible cause Possible solution

Possible cause Possible solution
® Unit and Bluetooth ® device are too far apart.
® Unit and Bluetooth ® device closer together and try to
® Unit and returned to the other party.
® Unit microphone away from the car speakers.
® audio-compliant device does not support AVRCP (Audio/Video
® audio-compliant device for
Display
Possible cause
Communication with the Bluetooth
mode.

Check the connection.

Verify the wiring.
The Bluetooth ® Hands-Free device is not connected in the Bluetooth
mode, or it is not paired with this unit.

Pair and connect the Bluetooth
If a Bluetooth ® Audio device is not detected in 2 minutes during pairing, "TIME
(After 5 seconds)
OUT" is displayed and pairing is canceled.

Pair and connect the Bluetooth
®
If a Bluetooth Hands-Free device is not detected in 2 minutes during pairing,
(After 5 seconds)
"TIME OUT" is displayed and pairing is canceled.

Pair and connect the Bluetooth
Pairing Bluetooth ® Audio device is canceled because the PIN code does not
match.
(After 5 seconds) 
Set the PIN code for this unit.
Profi le of the Bluetooth ® Audio device is not matched.

Connect the Bluetooth ® Audio device with profi le supported this unit.
Pairing Bluetooth ® Hands-Free device is canceled because the PIN code does not
match.
(After 5 seconds) 
Set the PIN code for this unit.
Profi le of the Bluetooth ® Hands-Free device is not matched.

Connect the Bluetooth ® Hands-Free device with profi le supported this unit.
(After 5 seconds)
A paired Bluetooth ® Hands-Free device could not connect to this unit.

Connect the paired Bluetooth

Possible solution
® device is not possible in the Bluetooth ®
® Hands-Free
® Hands-Free device with this unit.
®
audio device with this unit.
® Hands-Free device with this unit.
® Hands-Free device.
35
CQ-RX400U/CQ-RX200U