Inline 400 Mounting; Orientation Of The Inline 400 - Franklin Electric INLINE 400 Manual Del Usuario

INSTALLATION

Inline 400 Mounting

Inline 400 Mounting

Orientation of the Inline 400

It is preferred (for ease of priming) to install the Inline 400
unit in a VERTICAL orientation.
However, the unit can be installed in the HORIZONTAL
position as long as the air-bleed valve is facing upwards
(arrow) and the pump is laying horizontally. Never allow
the pump to hang unsupported from a horizontal surface;
never use the plumbing for pump support. Always use the
mounting bracket for pump support.
8