Remington Powerdriver 490 Instrucciones De Operación página 23

Power load listings are recommendations only. If you are in
doubt, try a test fastening using the next lightest power load.
Power fasteners and power loads are available in blister packs
of 25 and cartons of 100.
IMPORTANT
• Recommended for use with Remington
power fasteners.
• Do not use power fasteners longer than 2
washer fasteners longer than 3".
• If power fastener goes below the top surface of the board,
use penetrating control disc (see illustration below) or
washered SPW-type power fasteners.
• Always wear approved eye and ear protection.
* Use power fastener with penetration control disc, part
number 015549.
This tool is designed to use .22 caliber neck-down crimped
loads, power levels 1 (gray) through 4 (yellow).
5/8"
Neck-Down Crimped
Power Load
CAUTION: Do not use any load other than
the .22 caliber neck-down crimped load.
Other types of loads will cause load-ejection
problems.
.22 CALIBER Type A, neck-down crimp loads for powder
actuated tools
Stock
Number Number
A22C1
A22C2
A22C3
A22C4
101274
Application Chart
IMPORTANT
Load
Level
1
2
3
4
®
Straight Wadded
Power Load
Load
Strength
light
medium
heavy
extra heavy brass
23
power loads and
1
/ " or power
2
Color Code
Case
Body Head
brass Gray
brass Brown
brass Green
Yellow