SANUS VuePoint FPA701 Manual De Instrucciones página 13

3. Drill pilot holes as illustrated.
IMPORTANT: Pilot holes must be drilled to a depth of 63.5 mm (2½ in.), using a 3 mm (1/8 in.) diameter drill bit.
4. Tighten the lag bolts
14
CAUTION:
Improper use could reduce the holding power of the lag bolt. DO NOT over-tighten the lag bolts
3
≤ 16 mm
(5/8 in.)
only until they are pulled firmly against the washers
63.5mm
2.5 in.
.
15
4
15
14
STEP 3
.
14
13
13