SANUS VuePoint FPA701 Manual De Instrucciones página 9

If you are attaching the anti-tip strap to wood furniture:
1. Locate a secure area near the top of the furniture that is at least 26 mm (1 in.) thick.
2. Drill pilot hole to a depth of 26 mm (1 in.) using a 2.4 mm (3/32 in.) diameter drill bit.
3. Place the mounting plate
CAUTION: To avoid potential injuries or property damage!
1. Ensure mounting plate
P
2. Ensure all straps are tight.
S
over the drilled hole on the back of the furniture. Insert and tighten screw
P
is securely fastened to the furniture.
.
11
P
S
11
S
STEP 2-B
9