Publicidad
Idiomas disponibles
Idiomas disponibles
INTRODUCTION TO LG TOUCH SCREEN
MONITOR
What is LG Touch Screen Monitor?
LG Touch Screen Monitor T1710BP/T1910BP creates an environment for mouse operation based on 4-wire
y
y
resistive technology that allows you to control the touch screen in Windows.
No additional driver is required for installation since it is recognized as an HID (Human Interface Device) like a
y
y
USB mouse or keyboard. A USB cable is used to connect the monitor to the PC.
It uses calibration to align the area touched on the screen with the Windows cursor on the display.
y
y
To calibrate the touch screen, use the touch screen calibration software. (Calibration software and USB cable
y
y
supplied separately.)
It is possible for the touch screen and mouse to be used alternately without having to configure additional settings.
y
y
LG Touch Screen Monitor Operation Environment
Supported OS: Windows XP, Windows Vista (32-bit/64-bit), Windows 7 (32-bit/64-bit) (Supported OS should
y
y
support an HID-USB driver.)
Supported USB Interface: USB 1.1
y
y
Supported Functions
Click: tap the button or the area to be selected once.
y
y
Double Click: tap the button to be double-clicked twice quickly. Use this function after running the calibration
y
y
software file and installing the double click function.
Drag: tap the button or the drag bar to be dragged with a stylus pen or fingertip and keep it held down while
y
y
moving the button/drag bar to where it needs to be. When using your fingertip to drag, the function may not always
work properly because it is harder to apply pressure to the screen evenly. It is recommended that a tool such as a
stylus pen that can apply even pressure is used on the touch screen.
Right Click: click on the area to be right-clicked with a stylus pen or fingertip and hold for two to three seconds. The
y
y
right click function takes two to three seconds to work.
TOUCH SCREEN OWNER'S MANUAL
3
Publicidad
Capítulos
Solución de problemas
