CAN PIXMA MP830 Guía De Iniciación Rápida página 19

Operation Panel Name and Functions
(1) (2) (3) (4) (5)
(13)
(1)
[ON/OFF]
(2) [COPY]
(3) [FAX]
(4) [SCAN]*
(5) [MEMORY CARD]
(6) In Use/Memory Lamp
(7) Alarm Lamp
(8) LCD
(Liquid Crystal Display)
(9) [Menu]
(10) [Settings]
(11) Numeric Buttons
(12) [Stop/Reset]
(13) One-Touch Speed Dial Key
(14) Auto Sheet Feeder Lamp
(15) Cassette Lamp
18
Introduction
(6) (7)
(14) (16) (18) (20)
(15) (17) (19) (21)
Turns the machine ON and OFF. Before turning ON the machine,
make sure the Document Cover is closed.
Switches the machine to Copy mode. Flashes when the machine is
turned on.
Switches the machine to Fax mode.
Switches the machine to Scan mode. This button is used when the
machine is connected to a computer. (Refer to the Scan Guide.)
Switches the machine to Memory card mode.
Flashes when the telephone line is in use. Lights when there are
documents stored in the machine's memory.
Lights or flashes orange, when an error occurs, or when paper or
ink has run out.
Displays messages, menu selections, and the operation status.
Used to display menus.
Use to configure the page size, media type, and image correction
settings.
Enter numerical values such as the number of copies, as well as
fax/telephone numbers and characters.
Cancels operations. If this button is pressed during printing, the
machine aborts printing.
Push these buttons to dial pre-registered fax/telephone numbers or
group.
Lit when the Auto Sheet Feeder is selected.
Lit when the Cassette is selected.
(8)
(9) (10)
(23) (25)
(22) (24) (26)
(11) (12)
(27) (29)
(28) (30) (31)
Chapter 1