CAN PIXMA MP830 Guía De Iniciación Rápida página 48

3
Remove the ink tank whose lamp is flashing fast.
1. Push the tab (A) and remove the ink tank.
4
Prepare a replacement tank.
1. Remove the new ink tank from its packaging, then pull the orange tape (A) toward
the arrow so that the protective film does not remain on the air hole (C). Then
remove the film completely (B).
2. Remove the orange protective cap (D) from the bottom of the ink tank and discard
it. Carefully hold the protective cap when removing it to prevent the ink from
staining your fingers.
Discard the cap once it is removed.
(B)
Chapter 10
(A)
(C)
(A)
(D)
Maintenance
47