Taking Measurements - Riester ri-champion smartPRO Instrucciones De Operación

TAKING MEASUREMENTS

Always apply the pressure cuff before turning on the meter.
1. Press
2. The heart symbol "
3. After the measurement, the meter displays the systolic pres-
4. Press
5. The meter will enter Bluetooth mode automatically.
4. Measurement is in progress. After the meter
. All the LCD symbols will appear. Press
" (numbers from 1 to 4) whose test reading
user "
will be stored in its memory. Then the cuff will begin to inflate
automatically.
the measurement.
sure, diastolic pressure and pulse rate.
to switch off or it will switch off automatically after
being idle for 3 minutes.
®
(ri-champion smartPRO+ only)
is turned on, the cuff will begin to inflate
automatically.
" will flash when pulse is detected during
11
to select