Specifications; System Performance; Blood Pressure Measurement Performance - Riester ri-champion smartPRO Instrucciones De Operación

SPECIFICATIONS

SYSTEM PERFORMANCE

Model no.: TD-3128
Power Source: Four 1.5V AA alkaline batteries
Battery Life: 200 times
Size of Meter w/o Cuff: 141 (L) x 121 (W) x 72 (H)mm, 350g without batteries
Cuff Size: S (small) 15 – 24cm (5.9 – 9.4 inches) with air tube 80 cm
W (Wide size) 24 – 43 cm (9.4 – 16.9 inches) with air tube 80 cm
Memory: Maximum 400 memory records
External Output: Bluetooth (ri-champion
(Frequency:2.45GHz, Bandwidth:170MHZ, Modulation:GFSK, ERP:3.54 dBm)
Power Saving: Automatic power off if system idle for 3 minutes
Operating Conditions: 5°C to 40°C (41°F to 104°F), 15% to 93% relative
humidity, 700 hPa to 1060 hPa
Storage / Transportation Conditions: -25°C to 70°C (-13°F to 158°F), 10% to
95% relative humidity
Power Supply Input: DC + 6V / 1A (max) via Power Plug
IP Classification: IP21
Expected Service Life: 3 years

BLOOD PRESSURE MEASUREMENT PERFORMANCE

Heart Rate Range: 40 – 199 beat per minute
Systolic Measurement Range: 60 mmHg – 255 mmHg
Diastolic Measurement Range: 30 mmHg – 195 mmHg
Pulse Rate Measurement Range: 40 – 199 beats / minute
Maximum Inflation Pressure: 280 mmHg
Accuracy of Pressure: ±3 mmHg or ±2% of reading
Accuracy of Pulse rate: ±4% of reading
Measurement Unit: Either mmHg or KPa
This device has been tested to meet the electrical and safety requirements of: IEC/
EN 60601-1, IEC/EN 60601-1-2, EN 301 489-17, EN 301 489-1, EN 300 328.
Reference to Standards:
• EN 1060-3, NIBP-requirements
• IEC60601-1 General requirement for safety
• IEC60601-1-2 Requirements for EMC
• EN1060-4, NIBP clinical investigation
• AAMI / ANSI / IEC 80601-2-30, ANSI/AAMI/ISO 81060-2, NIBP requirements
smartPRO+ only)
®
21