Switching On The Fryer - Kasanova LKP000002 Manual De Instrucciones

20
DEEP FRYER
appliance parts.
FILLING WITH COOKING FAT
Olive oil, butter and margarine are not suitable for frying, and should not
be used.
Only put liquid, good quality cooking oil or fat into the oil receptacle (E).
Pay close attention to the (MIN/MAX) markings in the oil receptacle (E).

SWITCHING ON THE FRYER

• Now close the removable lid (B) on the fryer.
• Then connect the power lead of the fryer to a correctly installed
shockproof socket.
• Set the temperature control (H) to the required temperature. Please
see the table in this manual for the temperature required for your
food.
• The appliance will now begin the heating cycle
When you use the frying for the first time, you might briefly detect a slight
smell, which can happen when substances used in manufacture heat
up. Please ensure that there is adequate ventilation e.g. by opening a
window.
The initial heating process takes a few minutes, depending on the
amount of oil/fat and temperature selected.
Meaning of the indicator light (F):
When you plug the appliance into a shockproof socket and set a given
temperature on the temperature control (H), the indicator light (F) comes
on to show that heating is in progress.
Do not place the frying basket into the appliance until the
oil/fat is hot enough.
Be particularly careful during operation and when opening
the lid! Hot steam will escape --danger of scalding!
The mains cable must not come into contact with hot
INSTRUCTION MANUAL