Mounting T-Bar; Technical Specifications - TRUSST CT-CS60 Guía De Referencia Rápida

TRUSST® QRG

Mounting T-Bar

R-clip and
Safety
Pin
To install onto the Crank Tower:
1. Lower the mounting tube into the mast of the CT-CS60.
2. Hand-tighten the tension knob until just snug, being careful not to damage the mast.
3. Choose the bracket mounting distance you need and tighten the tension knobs on the saddles.
To install truss on the T-bar:
1. Arrange truss chords into saddle brackets.
2. Secure in place using safety pins and R-clips.
· NOTE: You will need TWO Crank Towers to lift truss pieces safely.
· CT-CS60 Crank Tower is designed to accommodate TRUSST® CT-290 box truss as
well as other common sizes such as 12 in/15 in/16 in/20.5 in and 220 mm/290 mm/360 mm/
390 mm/470 mm box or triangle truss sections.

Technical Specifications

Specification
Crank Tower Height
Fits Truss Sizes
Load Capacity (Evenly distributed)
Weight
Total Footprint (at maximum spread)
Product Info
Saddle
Brackets
6.4 to 19.7 ft (1.9 to 6.0 m) *without T-bar adaptor
12 in, 15 in, 16 in, and 20.5 in and
220 mm, 290 mm, 360 mm, 390 mm and 470 mm
550 lb (250 kg)
242 lb (110 kg)
7.25 x 7.25 ft (2.2 x 2.2 m)
Name
CT-CS60
7
Tension
Knob
Mounting
Tube
Values
Item Code
22111023
EN
UPC Number
781462213718