Hoover IRONspeed Manual Del Usuario página 7

48001377 Pages for Mods.pdf 1 5/11/2011 12:18:30 PM
C
M
Y
CM
MY
CY
CMY
K
5 - GB
Ironspeed_SF__1-12_union.indd 5
Chapter 2: Preparation for Use
Due to the powerful output of steam, Hoover recommends the use of an active
ironing board with blowing and vacuuming function which allows escape of any
excess steam.
Place the ironing system on a stable and level surface, for example on the hard part
of an ironing board or on a heat-resistant surface.
Chapter 2.1 - What Kind of Water May be Used?
The Hoover ironing system has been designed to be used with tap water only. There
is no need to use distilled or pure distilled water. Nevertheless, in case you live in a
hard water area, you can mix 50% of distilled water with 50% of tap water. Do not
use any other kind of water or do not add any contents to the removable water tank
as it can damage your appliance.
Chapter 2.2 - Filling the Water Tank
Switch off the appliance and unplug it.
water with the help of a bottle. Do not exceed the max mark.
Warning: Do not add vinegar, hot water, perfume, or any other kind of chemical
agents or any other contents in the water tank. It could damage the steam
generator and shorten its life use.
Chapter 2.3 - Switching On the Appliance
Domestic Iron Models:
Connect the appliance with the mains cord to an earthed socket and switch on the
appliance is working and that the boiler is heating up.
start to use the steam feature.
Professional Iron Models:
Connect the appliance with the main cord to an earthed socket. Press the iron on/
light up and inform you that the appliance is working and the iron soleplate and
boiler are heating up.
Fig. 8: Water Tank Filling
19-10-2009 17:57:52