N.B.
It's quite normal and will disappear quickly.
This is due to a treatment applied to the soleplate that improves the steam
performance. Before use, please use the iron as described in Chapter 3.4 Vertical
Steam Ironing.
Do this for all three presets (See Chapter 3.3) until the water tank is empty.
Chapter 3: Using Your Steam Generator
Select the temperature of the soleplate by turning the dial (10) on the iron to the
will indicate to you that the soleplate has reached the requested temperature.
adjusts without interrupting your ironing.
Help
Check the laundry care label of the garment to select the best temperature for each
textile. Please note that during use, the temperature light goes on from time to time.
delicate fabric.
If the temperature is too low, some drops of water could escape from the soleplate.
Please raise up the temperature abov
to avoid this issue.
Chapter 3.2 - Ironing
Dry Ironing
Domestic Iron Models:
Select the temperature of the soleplate following the indications of chapter 3.1.
When the soleplate reaches the required temperature, start your ironing without
pressing the steam trigger (11).
Professional Iron Models:
Only turn on the iron switch (1d). Select the temperature of the soleplate following
the instructions in chapter 3.1. Start your ironing when the soleplate reaches the
appropriate temperature.
Steam Ironing
Select the temperature of the soleplate following the instructions in chapter 3.1. On
Starting from that time you can begin your ironing and press the steam trigger (11).
selector (12). In order to achieve the best results, please refer to the dedicated
chapter 3.3 for more information.
6 - GB
Ironspeed_SF__1-12_union.indd 6
19-10-2009 17:57:53