Cautions And Warnings - Digi Connect ES Serie Manual Del Usuario

Symbol
QTY
REV

Cautions and warnings

CAUTION!
• Do not rely on the validity of the data from this device server without validating the integrity of the entire
information collection system.
• This product uses Double Pole/Neutral fusing. For continued protection against risk of fire, return the
unit to the factory for fuse replacement.
• The facility staff where this equipment is installed is responsible to ensure that this equipment and the
equipment it is connected to are safe, functional, and properly configured for their environment and
intended use. Devices and equipment must be installed, inspected, and maintained in accordance with
this guide.
• It is the responsibility of the system integrator or facility staff to verify data stream integrity periodically.
• Connect ES should be periodically cleaned.
• When cleaning or disinfecting the device, power to the device must be turned off and the power
disconnected.
• Clean and disinfect the device periodically by wiping the outer case with a lint-free cloth, lightly
moistened with warm water and a mild, non-abrasive cleaning solution or 70% isopropyl alcohol.
• Do not use excessive pressure when wiping.
• Do not sterilize the device server.
Digi Connect ES Device Server Hardware setup guide
Definition
Package recycling information
Quantity
Revision number
Serial number
Temperature limitation
Warning
WEEE
Device was put on the market after 13 August 2005. Conforms to the Directive 2003/
108/EC on waste electrical and electronic equipment (WEEE) of the European
Parliament.
Cautions and warnings
10