Thrustmaster T150 PRO Force Feedback Manual Del Usuario página 300

AUTOMATIC RACING WHEEL CALIBRATION
The wheel automatically self-calibrates when you plug the racing wheel into an electrical outlet and
connect the racing wheel's USB connector to the console.
During this phase, the racing wheel will rotate quickly towards the left and the right, covering a 1080
degree angle, before stopping at the center.
WARNING: Never touch the racing wheel during the self-calibration phase!
(This could result in improper calibration and/or personal injuries.)
MODE BUTTON AND INDICATOR LIGHT (6)
MODE button for the pedal set
The MODE button allows you to electronically swap the accelerator and clutch pedals.
To do so, simply press the MODE button (6) for 2 seconds.
The racing wheel's internal memory stores whether the pedals have been swapped around or not.
GAS AND CLUTCH PEDALS
Color of the MODE indicator light (6)
NORMAL RED
SWAPPED AROUND GREEN
WARNING:
With the included T3PA pedal set, make sure that the indicator light remains red!
(or else the gas pedal will not function properly)
Other hints regarding the MODE button
To learn more about the MODE button and indicator light, please visit
http://support.thrustmaster.com. Click Racing Wheels / T150 PRO Force Feedback, and then
select Manual or FAQ.
UPDATING YOUR RACING WHEEL'S FIRMWARE
The firmware included in your racing wheel's base can be updated to a more recent version featuring
product enhancements.
To display the firmware version that your racing wheel is currently using and update it if required: on
PC, visit http://support.thrustmaster.com. Click Racing Wheels / T150 PRO Force Feedback, then
select Firmware and follow the instructions describing the download and installation procedure.
HELP FILES AND FAQS (NOT INCLUDED IN THIS MANUAL)
Please visit http://support.thrustmaster.com. Click Racing Wheels / T150 PRO Force Feedback,
and then select Manual or FAQ.
If your racing wheel and/or pedal set do not function correctly, or if they seem to be improperly
calibrated:
Power off your console and completely disconnect the racing wheel. Then reconnect all cables
(including the power supply cable and the pedal set), and restart your console and your game.
10/20